Project cargo and heavy lift
Recuperator 2 (RC-2), Bogor to Muntok
An oversized, overweight Recuperator 2 at 22 tons per unit, hauled by dolly trailer from the factory in Bogor to Sunda Kelapa port for shipment to the project site in Muntok, Bangka Belitung.
- Cargo
- Recuperator 2 (RC-2)
- Origin
- Bogor, West Java
- Destination
- Muntok, Bangka Belitung
- Transport mode
- Road (dolly) + sea
- Documented
- March 2024
Key figures
- Dimensions
- 919 × 417 × 433 cm
- Weight
- 22 tons per unit
- Fleet
- Dolly, 12-metre chassis
- Payload capacity
- 55 tons
- Lifting equipment
- Factory hoist crane
- Port of loading
- Sunda Kelapa, Jakarta
Stage by stage
19 photos from the operation. Select a photo to view it full size.
- 01
Cargo preparation at the factory
The RC-2 measures 919 × 417 × 433 and weighs 22 tons per unit. Transport was matched to the cargo's size and weight: a dolly trailer with a 12-metre chassis and a 55-ton payload.
- 02
Loading onto the dolly trailer
The RC-2 was loaded onto the dolly trailer using the factory's hoist crane. With a 22-ton load, the crane's rated capacity had to exceed the weight being lifted.
- 03
Factory to port
The road leg from Bogor to Sunda Kelapa port had to clear several obstacles: pedestrian bridges, underpasses, and street markets spilling onto the road.
Project Cargo & Heavy Lift
End-to-end management for heavy equipment, industrial machinery, steel piles, and project structures. Road transport, barges, and crane lifts coordinated under single oversight to site.
View serviceMore operations
30-metre steel piles, Cilegon to Tanah Bumbu
Cilegon, Banten → Tanah Bumbu, South Kalimantan
Hyundai HL780 wheel loader, Jakarta to Lahat
Jakarta → Lahat, South Sumatra
Bending machine, Jakarta to Simalungun
Jakarta → Simalungun, North Sumatra
Discuss a similar project
Send the cargo dimensions, weight, route, required date, and site conditions for an initial assessment.